26
D-Link DIR-640L User Manual
Section 3 - Configuration
Select
3G
from the drop-down menu.
In most cases you can choose
Auto-Detection
to get a connection.
Otherwise choose
Manual
and personalize the settings below.
Choose the country where you get 3G service from the drop-down menu.
Choose the telecom that provides your service from the drop-down
menu.
Choose the type of 3G network you have from the drop-down menu.
Enter your 3G network user name, this is not always required by your ISP.
Enter your 3G network password and then retype the password in the
next box. This is also not always required by your ISP.
Enter the number your ISP gave you to dial for a connection.
Choose the type of authentication need to connect or use auto detection.
If your ISP has given you an Access Point Name to use for your connectivity, you may enter it here.
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the primary and secondary DNS server addresses (static PPPoE only).
To keep prevent inactivity from assuming a dropped connection you can select
Use LCP Echo Request
to request frequent pings
to maintain communication. This is disabled by default.
My Internet
Connection Is:
Dial-Up Profile:
Country:
Telecom
3G Network:
User Name:
Password:
Dialed Number:
Authentication:
APN:
Reconnect Mode:
Maximum Idle
Time:
DNS Addresses:
Keep Alive:
3G
Choose 3G if you are connecting from a mobile wireless network with an ISP that uses a 3G connection.
