78
D-Link DIR-635 User Manual
Section 5 - Connecting to a Wireless Network
Connect Using WCN 2.0 in Windows Vista
®
The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista
®
. The following instructions for setting
this up depends on whether you are using Windows Vista
®
to configure the router or third party software.
When you first set up the router, Wi-Fi protection is disabled and not configured. To enjoy the benefits of Wi-Fi protection,
the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vista’s
built-in support for WCN 2.0, use software provided by a third party, or manually configure.
If you are running Windows Vista
®
, log into the router and click the
Enable
checkbox in the
Basic
>
Wireless
section.
Use the Current PIN that is displayed on the
Advanced
>
Wi-Fi Protected Setup
section or choose to click
Generate
New PIN
or
Reset PIN
to
Default
.
For additional information, please refer to page 68.
If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished,
proceed to the next section to set up the newly-configured router.
