Quick Start Guide
Appendix A
To perform a reset, please follow steps below:
Step 1
With the unit on, place a paper clip into the hole on the back on the unit labeled
Reset
.
Step 2
Hold the paper clip down for 10 seconds and release.
Note:
Do not repower unit during this procedure.
Step 3
The unit will reboot on its own. Once the WLAN light stops blinking, the unit is reset.
Resetting the router does not reset the firmware to an earlier version. It will change all settings back to
factory defaults.
Note:
The factory defaults username is admin, and there is no password.
