DIR-620
Quick Installation Guide
PPPoE or IPoE WAN Connection
1. Go to the
Net / Connections
page and select the
WAN
connection.
2. In the
General settings
section, select a needed value from the
Connection Type
drop-down list.
3. In the
Physical layer
section, select the value corresponding to the
INTERNET port of the router (
port 5
) from the
Physical interface
drop-down list.
4. If your ISP uses MAC address binding, enter the address registered by
your ISP upon concluding the agreement in the
MAC
field.
5.
For Static IP connection (IPoE)
: fill in the
IP Address
,
Netmask
,
Gateway IP Address
, and
Primary DNS server
field.
6.
For Dynamic IP connection (IPoE)
: select the
Obtain an IP address
automatically
and
Obtain DNS server addresses automatically
checkboxes.
7.
For PPPoE connection
: enter authorization data provided by your ISP
(the username (login) in the
PPP Username
field and the password in
the
Password
and
Password confirmation
fields), or select the
Without authorization
checkbox if authorization is not required.
8. If needed, fill in other fields on the page in accordance with data provided
by the ISP.
9. Click the
Save
button.
13
