DIR-620
Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data
provided by your
Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
WiMAX WAN Connection
1. If your operator specified an identifier for the WiMAX network, proceed
to the
WiMAX / Information
page, enter the required value in the
SSID
field and click the
Connect
button.
2. Go to the
Net / Connections
page and click the
Add
button.
3. In the
Physical layer
section, select the
USB-WIMAX
value from the
Physical interface
drop-down list.
4. In the
General settings
section, specify a name for your connection
(any name for easier identification) in the
Name
field and select the
IPoE
value from the
Connection Type
drop-down list.
5.
For Static IP connection
: fill in the
IP Address
,
Netmask
,
Gateway
IP Address
, and
Primary DNS server
fields.
6.
For Dynamic IP connection
: select the
Obtain an IP address
automatically
and
Obtain DNS server addresses automatically
checkboxes.
7. Click the
Save
button.
8. On the
Net / Connections
page, select the choice of the
Default
gateway
radio button corresponding to the new WiMAX WAN
connection.
11
