secSon.
Step 5: Click
Save
to save the sebngs.
3.
How do I reset my DIR-508L to factory default settings?
Example:
a. If you forget your router’s password, you can perform a reset to return all settings to the
factory default.
Step 1: While the router is on, use the end of a paper clip to press the buUon inside the
pinhole on the side of the router, as highlighted by the red square below.
Step 2: Hold the buUon down for 10 seconds and then release.
Step 3: The unit will reboot automaScally. Once the WLAN light stops blinking, the unit has
been reset. Resebng the router does
not
reset the firmware to an earlier version, it only
changes all sebngs back to factory defaults.
Note:
1. The factory default username is
Admin
, and there is no password.
2. You will need to register the router with mydlink again aeer a factory reset.