DIR-300A
Wireless N150 Router
User Manual
Configuring via Web-based Interface
Routing
On the
Advanced / Routing
page, you can add static routes into the system.
Figure 113. The
Advanced / Routing
page.
To create a new route, click the
Add
button. In the line displayed, you can specify the following
parameters:
Parameter
Description
Destination network
A destination network to which this route is assigned.
Destination netmask
The destination network mask.
Gateway
An IP address through which the destination network can be accessed.
Metric
A metric for the route. The lower the value, the higher is the route
priority.
Optional
.
After specifying the needed parameters, click the
Apply
button.
To edit an existing route, select a needed field in the relevant line of the table, change its value, and
click the
Apply
button.
To remove an existing route, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button. Then click the
Apply
button.
Page
141
of 181
