background image

3

LIMITED WARRANTY

D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity

who originally purchased the product from D-Link or its authorized reseller or distributor.

Limited Hardware Warranty: 

D-Link warrants that the hardware portion of the

D-Link products described below (“Hardware”) will be free from material defects in

workmanship and materials from the date of original retail purchase of the

Hardware, for the period set forth below applicable to the product type (“Warranty

Period”) if the Hardware is used and serviced in accordance with applicable

documentation.

Product Type

Warranty

Period

Product (excluding power supplies and

fans), if purchased and delivered in the

fifty (50) United States, or the District of

Columbia (“USA”)

As long as the

original

purchaser still

owns the product

Product purchased or delivered outside

the USA

One (1) Year

Power Supplies and Fans

One (1) Year

Spare parts and spare kits

Ninety (90) days

D-Link’s sole obligation shall be to repair or replace the defective Hardware at no charge to the original

owner.  Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office.

The replacement Hardware need not be new or of an identical make, model or part; D-Link may in its

discretion may replace the defective Hardware (or any part thereof) with any reconditioned product

that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to

the defective Hardware.  The Warranty Period shall extend for an additional ninety (90) days after any

repaired or replaced Hardware is delivered. If a material defect is incapable of correction, or if D-Link

determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the

price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return

to D-Link of the defective Hardware.  All Hardware (or part thereof) that is replaced by D-Link, or for

which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.

Limited Software Warranty: 

D-Link warrants that the software portion of the product (“Software”) will

substantially conform to D-Link’s then current functional specifications for the Software, as set forth

Summary of Contents for DI-701 iShare



















































Reviews: