23
D-Link DHP-W311AV User Manual
Section 3 - Configuration
Advanced Wireless
Transmit Power:
WMM Enable:
Short GI:
IGMP Snooping:
WLAN Partition:
HT20/40
Coexistence:
Sets the transmit power of the antennas.
WMM is a Quality of Service (QoS) system for
your wireless network. Enabling this feature
will improve the quality of video and voice
applications for your wireless clients.
Check this box to reduce the guard interval
time therefore increasing the data capacity.
However, this setting may decrease stability
and reliability.
Select this checkbox to enable IGMP
snooping. IGMP snooping is a layer 2 feature
which enables the device to learn Multicast
group membership based on IGMP messages passing through the built-in switch. Because the switch learns the IGMP messages
and knows which clients are involved in the multicast group membership, it is able to forward multicast traffic only to the
ports that requested it (based on their membership).
Select this checkbox to enable WLAN partition. If this feature is enabled, then there is no barrier between communication
among wireless stations connecting to the DHP-W310AV. If this is disabled, wireless clients are not allowed to exchange data
through the DHP-W310AV.
Enabling this function allows compatibility with both 802.11n devices as well as 802.11b/g at the cost of speed. Disabling
this will give higher speeds but only allow 802.11n devices to function.
The Advanced Wireless section allows you to change several advanced settings on your DHP-W310AV. Most users will not need to modify this section.
