D-Link DGS-3308TG, User Manual

Page: 69 / 239

8-port Gigabit Ethernet Switch User’s Guide
59
Figure 6-4. Setup User Accounts screen
User Accounts Management
From the
Main Menu
, highlight
Setup User Accounts
and press
Enter
, then the
Setup User Accounts
menu
appears.
1.
Toggle the
Action:< >
field to
< Add >
using the space bar. This will allow the addition of a new user. The other
options are
< Delete >
- this allows the deletion of a user entry, and
< Update >
- this allows for changes to be made to an
existing user entry.
2. Enter the new user name, assign an initial password, and then confirm the new password. Determine whether the new
user should have < Root >, < User+ > , or < User > privileges. The space bar toggles between the three options.
3.
Highlight
APPLY
and press enter to make the user addition effective.
4.
Press
Esc
. to return to the previous screen or Ctrl+T to go to the root screen.
5. A listing of all user accounts and access levels is shown below the user setup menu. This list is updated when APPLY
is executed.
6.
Please remember that
APPLY
makes changes to the switch configuration for the
current session only .
All changes
(including User additions or updates) must be entered into non-volatile ram using the
Save Changes
command on
the
Main Menu
- if you want these changes to be permanent.
Root, User+ and Normal User Privileges
There are three levels of user privileges:
Root
and
User+,
and
User
. Some menu selections available to users with
Root
privileges may not be available to those with
User
+ and
User
privileges.
The following table summarizes the
Root, User+
and
User
privileges:
Switch Configuration Privilege
Management Root User+ User