D-Link DGS-3308TG, User Manual

Page: 109 / 239

8-port Gigabit Ethernet Switch User’s Guide
99
Highlight Static Router Port Settings from the Multicasting Menu and press Enter .
Figure 6-46. Static Router Port Setup screen
Note : All IGMP Report packets will be forwarded to the router port.
Note: IGMP queries (from the router port) will be flooded to all ports.
Note: All UDP multicast packets will be forwarded to the router port. Because routers do not send
IGMP reports or implement IGMP snooping, a multi-port router connected to the router port of
the Layer 3 switch would not be able to receive UDP data streams at all of its ports unless the
UDP multicast packets were all forwarded to the router port.
Note: A router port will be dynamically configured when IGMP query packets, RIPv2 multicast,
DVMRP multicast, PIM-DM multicast packets are detected flowing into a port.
The
Action:< >
field can be toggled between
Add/Modify
and
Delete
using the space bar. To add a port to the static
router port table, select
Add/Modify
and enter the VID of the VLAN the router port will belong to.
Highlight the first field of Router Port (:[ ] . Each port can be set individually as a router port by highlighting the
port’s entry using the arrow keys, and then toggling between M and
–
using the space bar.
Highlight
APPLY
and press
Enter
to make the changes current. Use
Save Changes
from the
Main Menu
to enter
the changes into NV-RAM.
To delete an entry, select
Delete
and enter the VID of the VLAN for which the router port table entry is to be deleted.
Highlight
APPLY
and press
Enter
. The entry for the VLAN will be deleted. Use
Save Changes
from the
Main Menu
to enter the changes into NV-RAM.