D-Link DGS-3100 SERIES User Manual Download Page 65

Page: 65 / 295

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Defining SNMP Views

SNMP views provide or block access to device features or aspects of features. For example, a view can be defined to show
that SNMP view A has

included

access to Multicast groups, while SNMP view B has

excluded

access to Multicast groups.

Feature access is granted via the MIB name or MIB Object ID.

Click

Configuration > SNMP Settings > SNMP View Table

. The

SNMP View Table Page

opens

Figure 0-13 SNMP View Table Page

The SNMP View Table Page contains the following fields:

Field

Description

View Name

Defines the

view

name (limited to 30 alphanumeric characters).

Subtree OID

Defines the OID included in, or excluded from, the selected SNMP view.

View Type

Defines whether the defined OID branch will be included in, or excluded from, the selected
SNMP view.

Define the

View Name, Subtree OID

and

View Type

fields.

Click

. The SNMP View Table is defined, and the device is updated.

To delete a view from the SNMP View Table Page:

Select an entry on the list.

Click

. The entry is deleted, and the device is updated.

Summary of Contents for DGS-3100 SERIES








































































































































































































































































































Search results

Summary of Contents for DGS-3100 SERIES

Reviews:

Brands by name

Popular brands

D-Link DGS-3100 SERIES, User Manual

Search results

Summary of Contents for DGS-3100 SERIES

Reviews:

Brands by name

Popular brands