manualshive.com logo in svg

D-Link DGS-3100 SERIES, User Manual

The D-Link DGS-3100 SERIES is a high-performance network switch designed for businesses. With advanced specifications and features, this reliable product ensures seamless connectivity. Access the user manual for free download at manualshive.com, providing detailed instructions to maximize the potential of this device.

Share
Download
background image

DGS-3100 Series Gigabit Stackable Managed Switch User Manual 

 

124 

Field 

Description

Unit 

Defines the stacking member for which the Voice VLAN parameters are displayed.  

From Port 

Defines from which port number bandwidth settings are displayed. 

To Port 

Defines to which port number bandwidth settings are displayed. 

Mode 

Defines the Voice VLAN mode. The possible field values are: 

 

Disabled — Disables the selected 

port

 on the Voice VLAN. 

 

Auto — Indicates that if traffic with an IP Phone MAC address is 
transmitted on the port/LAG, the 

port

 joins the Voice VLAN. Timeout is as 

defined in the Defining Voice VLAN Global Settings section. If the MAC 
Address of the IP phones OUI was added manually to a port in the Voice 
VLAN, the user cannot add it to the Voice VLAN. 

Security 

Indicates if port security is enabled on the Voice VLAN. Port security ensures that 
packets arriving with an unrecognized OUI are dropped. The possible field values 
are: 

 

Enable — Enables port security on the Voice VLAN. 

 

Disable — Disables port security on the Voice VLAN. 

Membership 

Indicates whether the Voice VLAN member is a static or dynamic member. Dynamic 
indicates that the VLAN membership was dynamically created when a packet with 
Voice VLAN OUI was captured by the device. Static indicates that the VLAN 
membership is user-defined. An * indicates that the port is not a member of the Voice 
VLAN. This is only used when Voice VLAN is disabled on this port. 

2. 

To configure Voice VLAN Port Settings, select the particular unit, as well as the range of ports to set. 

S

elect a 

Mode

, and a 

Security 

setting, and click 

. The Voice VLAN Ports are set, and the device is

 

updated.

 

Defining OUIs 

The 

OUI Setting Page

 lists the Organizationally Unique Identifiers (OUIs) associated with the Voice VLAN. The first three 

bytes of the MAC Address contain a manufacturer identifier. While the last three bytes contain a unique station ID. Using 
the OUI, network managers can add specific manufacturer’s MAC addresses to the OUI table. Once the OUIs are added, all 
traffic received on the Voice VLAN ports from the specific IP phone with a listed OUI, is forwarded on the voice VLAN. 

1. 

Click 

L2 Features > Voice VLAN > OUI

. The 

OUI Setting Page

 opens:

 

Summary of Contents for DGS-3100 SERIES








































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3100 SERIES

D-Link DGS-1224TP - Web Smart Switch User Manual preview
DGS-1224TP - Web Smart Switch
Brand: D-Link Pages: 52
D-Link DGS-1008P Quick Install Manual preview
DGS-1008P
Brand: D-Link Pages: 8
D-Link DES-3225G Series Technical Bulletin preview
DES-3225G Series
Brand: D-Link Pages: 3
D-Link DES-1228 - Web Smart Switch Manual preview
DES-1228 - Web Smart Switch
Brand: D-Link Pages: 69
D-Link DGS-1210-10P Reference Manual preview
DGS-1210-10P
Brand: D-Link Pages: 109
Barco DCS-100 Specifications preview
DCS-100
Brand: Barco Pages: 2
D-Link DGS-3224TGR - Switch User Manual preview
DGS-3224TGR - Switch
Brand: D-Link Pages: 160
D-Link DGS-3024 User Manual preview
DGS-3024
Brand: D-Link Pages: 145
D-Link DGS-1510 Series Getting Started Manual preview
DGS-1510 Series
Brand: D-Link Pages: 64
D-Link DES-3528 - xStack Switch - Stackable Reference Manual preview
DES-3528 - xStack Switch - Stackable
Brand: D-Link Pages: 367
Audio Authority HMX-244 Installation And Operation Manual preview
HMX-244
Brand: Audio Authority Pages: 12
steute EX ZS 92 S 22 VD F Mounting And Wiring Instructions preview
EX ZS 92 S 22 VD F
Brand: steute Pages: 28
StarTech.com VS123HD User Manual preview
VS123HD
Brand: StarTech.com Pages: 10
Dahua DH-PFS3005-5ET-L Quick Start Manual preview
DH-PFS3005-5ET-L
Brand: Dahua Pages: 13
H3C H3C S5800-32F Installation Manual preview
H3C S5800-32F
Brand: H3C Pages: 110
Endress+Hauser Liquipoint FTW33 Operating Instructions Manual preview
Liquipoint FTW33
Brand: Endress+Hauser Pages: 48
Black Box 26592 Specifications preview
26592
Brand: Black Box Pages: 3
A-Neuvideo ANI-8PDU-24V Instruction Manual preview
ANI-8PDU-24V
Brand: A-Neuvideo Pages: 12

Brands by name

Popular brands

Load more brands