D-Link DGS-3100 SERIES, Cli Manual

Page: 107 / 220

99
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure the igmp snooping:
ing default host_timeout 250 state enable
Success.
DGS3100
DGS3100# config igmp_snoop
#
config router_port
Purpose To configure ports as router ports.
Syntax
config router_port <vlan_name 32> [add | delete] <portlist>
Description The
config router_port
comman
being connected to multicast-ena
d designates a range of ports as
bled routers. This will ensure that
all packets with such a router as its destination will reach the
d router − regardless of protocol, etc. multicast-enable
Parameters The name of the VLAN on which the router port
te]
– Specifies whether to add or delete ports defined in
parameter <portlist>, to the router port function.
will be configured as router
<vlan_name 32>
−
resides.
[add | dele
the following
<portlist>
− A port or range of ports that
ports.
Restrictions Only strator-level users can issue this command. admini
Example usage:
To set up static router ports:
DGS3100# config router_port default add 1-10
DGS3100
Success.
#
enable igmp_snooping
Purpose To enable IGMP snooping on the Switch.
Syntax
enable igmp_snooping
Description The
enable igmp_snooping
command enables IGMP snooping on
the Switch.
Parameters None.
Restrictions d. Only administrator-level users can issue this comman
Example usage:
To enable IGMP snooping on the Switch:
DGS3100# enable igmp_snooping