D-Link DGS-1510-10L/ME Hardware Installation Manual Download Page 48

Page: 48 / 67

DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide

Feature

Description

a short while other ports remain active.

•

For 802.3af/at capable devices it will provide the power for the
following classifications below.

Class

Usage

Max Power used by PD

Default

0.44 Watts to 12.95 Watts

Optional

0.44 Watts to 3.84 Watts

Optional

3.84 Watts to 6.49 Watts

Optional

6.49 Watts to 12.95 Watts

Reserved

12.95 Watts to 25.5 Watts

•

Follow the PSE pinout standard. For an alternative solution, send
the power over pins 1, 2, 3 and 6 of 8 wires of UTP cables.

•

For IEEE 802.3af, use category 5e or higher UTP/STP cables.
Category 3 cables can be used if less power is required.

•

For IEEE 802.3at, use category 5e or higher UTP/STP cables

•

Both DGS-1510-28LP/ME and DGS-1510-28XMP/ME work with
all D-Link 802.3af and 802.3at capable devices and with all non-
802.3af and non-802.3at capable D-Link Access Points, IP
Cameras and IP Phones.

•

The total power budget is 193 Watts for DGS-1510-28LP/ME.

•

The total power budget is 370 Watts for DGS-1510-28XMP/ME.

Summary of Contents for DGS-1510-10L/ME




































































Search results

Summary of Contents for DGS-1510-10L/ME

Reviews:

Related manuals for DGS-1510-10L/ME

Brands by name

Popular brands

D-Link DGS-1510-10L/ME, Hardware Installation Manual

Search results

Summary of Contents for DGS-1510-10L/ME

Reviews:

Related manuals for DGS-1510-10L/ME

Brands by name

Popular brands