DGS-1210/ME series Metro Ethernet Switch Hardware Installation Guide
4
1
Product Introduction
Switch Description
Front Panel Description
LED Indicators
Rear Panel Description
Side Panel Description
Gigabit Fiber Port
Connecting the DPS-200A/500A/500DC to the RPS Port
(for DGS-1210-10/12TS/20/28/28X/28XS/52/ME only)
Installing
the
RPS
into a Rack
-
mount
Chassis
(
for
DGS-1210-10/12TS/20/28/28X/28XS/52/ME only)
Switch Description
The DGS-1210/ME Metro Ethernet Switch is equipped with Copper ports (10/100/1000Mbps), SFP ports
(1000Mbps) and SFP+ ports (10G) that can be used to attach various networking devices to the network like
Computers, Notebooks, Print Servers, Network Attached Storage devices, IP Cameras, VoIP PBX devices,
and other Switches. The Small Form Factor Portable (SFP) ports can be used together with fiber-optical
transceivers in order to connect various other networking devices, using a fiber-optic connection, to the
network at Gigabit Ethernet speeds over great distances.
This DGS-1210/ME Metro Ethernet Switch provides unsurpassed performance, fault tolerance, scalability,
robust security, standard-based interoperability and impressive technology to future-proof departmental and
enterprise network deployments.
It allows IGMP Snooping and Authentication, QoS, Bandwidth Control, ACL and many security functions. It
can be managed by Web UI, or commands via Telnet.
The DGS-1210/ME Metro Ethernet Switches have different port configuration (10/100/1000Base-T or SFP
ports) that may be used in to uplink various network devices to the Switch, including PCs, hubs and other
switches to provide a gigabit Ethernet uplink in full-duplex mode. The SFP (Small Form Factor Portable)
ports are used with fiber-optical transceiver cabling in order to uplink various other networking devices for a
gigabit link that may span great distances.
Front Panel Description
The front panel of the
DGS-1210-10/ME
switch consists out of the following:
•
8 10/100/1000Mbps Copper Ports
•
2 1000Mbps SFP port
•
One RJ-45 Console Port
•
LEDs for Power, Console, RPS, Link/Act for port 1 ~ 10
Figure 1.1 – DGS-1210-10/ME Front Panel
CAUTION:
The MiniGBIC ports should use UL listed
Optical Transceiver product, Rated Laser Class I. 3.3Vdc.
The front panel of the
DGS-1210-10P/ME
switch consists out of the following:
•
8 10/100/1000Mbps Copper Ports
•
2 1000Mbps SFP ports
•
One RJ-45 Console Port
Summary of Contents for DGS-1210/ME series
Page 53: ......
