D-Link DGS-1010MP, Installation Manual

Page: 3 / 8

1
E
N
G
LI
S
H
# LED Status Description
3
Link/Act/
Speed
(Ports 1
to 10)
Solid
amber
There is an active link negotiated at 10/100
Mbps on this port.
Blinking
amber
There is traffic on the port at 10/100 Mbps.
Solid
green
There is an active link negotiated at
1000 Mbps on this port.
Blinking
green
There is traffic on the port at 1000 Mbps.
4
PoE
(Ports
1 to 8)
Solid
green
The port is providing power to the
connected PoE-powered device.
Blinking
amber
Indicates a PoE-powered device is
connected to this PoE port, but the switch
has insufficient remaining power budget
to power the device.
Off
There is no PoE-powered device
connected to this port.
Table 1
Front Panel Connectors
1 2 3
Figure 2
# Item Description
1 Ports 1 ~ 8
10/100/1000 Mbps PoE-capable ports for
connecting Ethernet devices and PoE-
powered devices.
2 Port 9
10/100/1000 Mbps Ethernet uplink port
for connecting to another switch using an
Ethernet cable.
3 Port 10
100/1000 Mbps SFP uplink port for installing a
compatible SFP transceiver.
Table 2
Rear Panel Connectors
1 2 3 4
Figure 3
# Item Description
1 Power Input
This is used to connect the power cable to the
switch.
2
Power Cord
Retainer Slot
This is used for securing the power cord
retainer to the switch.
3 Switch GND This is used to connect the switch to ground.
4
Kensington
Lock Input
This is used to attach a Kensington security
lock.
Table 3
Before You Begin
This Quick Installation Guide gives you step-by-
step instructions for setting up your DGS-1010MP
10-Port Unmanaged Gigabit PoE Switch. The model
you have purchased may appear slightly different
from the one shown in the illustrations. For more
detailed information about the switch, please refer
to the User Manual.
Package Contents
This DGS-1010MP package should include the
following items:
• 1 x DGS-1010MP
• 1 x Power cord
• 1 x Power cord retainer
• 1 x Rack mount kit and rubber feet
• 1 x Quick Installation Guide
If any of the above items are damaged or missing,
please contact your local D-Link reseller.
Hardware Overview
LED Indicators
1 2
3
4
Figure 1
# LED Status Description
1
Power
Solid
green
The device is powered on.
Off The device is powered off.
2
PoE Max
Solid
amber
Indicates that the total PoE power output
of the switch has exceeded the Guard
Band threshold of 118 W, but is still below
the total budget of 125 W.
Blinking
amber
The total PoE budget of 125 W has been
exceeded and no additional devices can
be powered through the switch.
Off
The total PoE power consumption is below
the 118 W Guard Band threshold.