D-Link DFL-210 - NetDefend - Security Appliance User Manual Download

Page: 331 / 469

•

Enable Proxy ARP on the int interface.

•

As in L2TP, enable the insertion of new routes automatically into the main routing table.

Define a User Authentication Rule, this is almost identical to L2TP:

Agent

Auth Source

Src Network

Interface

Client Source IP

PPP

Local

all-nets

pptp_tunnel

all-nets (0.0.0.0/0)

Now set up the IP rules in the IP rule set:

Action

Src Interface

Src Network

Dest Interface

Dest Network

Service

Allow

pptp_tunnel

pptp_pool

any

int_net

All

NAT

pptp_tunnel

pptp_pool

ext

all-nets

All

As described for L2TP, the NAT rule lets the clients access the public Internet via the D-Link
Firewall.

Set up the client. For Windows XP, the procedure is exactly as described for L2TP above but
without entering the pre-shared key.

9.2.7. PPTP Roaming Clients

Chapter 9. VPN

331

Summary of Contents for DFL-210 - NetDefend - Security Appliance






















































































































































































































































































































































































































































































Search results

Summary of Contents for DFL-210 - NetDefend - Security Appliance

Reviews:

Related manuals for DFL-210 - NetDefend - Security Appliance

Brands by name

Popular brands

D-Link DFL-210 - NetDefend - Security Appliance, User Manual

Search results

Summary of Contents for DFL-210 - NetDefend - Security Appliance

Reviews:

Related manuals for DFL-210 - NetDefend - Security Appliance

Brands by name

Popular brands