D-Link DFL-210 - NetDefend - Security Appliance User Manual Download | Manualshive

Page: 307 / 469

background image

LDAP server authentication is automatically configured to work using LDAP Bind Request
Authentication. This means that authentication succeeds if successful connection is made to the
LDAP server. Individual clients are not distinguished from one another.

LDAP server referrals should not occur with bind request authentication but if they do, the server
sending the referral will be regarded as not having responded.

B. Activating LDAP Server User Authentication

When one or multiple LDAP server objects are defined, the next step is to have a user authentication
rule which refers to them.

One or more of the server objects can be associated as a list with a user authentication rule. The
ordering of the list determines the order in which server access is attempted. The first server in the
list has the highest precedence and will be used before those lower down.

Server Responses

When an LDAP server is queried by NetDefendOS with a user authentication request, the following
are the possible outcomes:

1.

The server replies with a positive response and the user is authenticated.

2.

The server replies with a negative response and the user is not authenticated.

3.

The server does not respond within the Timeout period specified for the server. If only one
server is specified then authentication will be considered to have failed. If there are alternate
servers defined for the user authentication rule then these are queried next.

Real-time Monitoring Statistics

The following statistics are available for real-time monitoring of LDAP server access for user
authentication:

•

Number of authentications per second.

•

Total number of authentication requests.

•

Total number of successful authentication requests.

•

Total number of failed authentication requests.

•

Total number of invalid usernames.

•

Total number of invalid password.

LDAP Authentication CLI Commands

The CLI objects that correspond to LDAP servers used for authentication are called LDAPDatabase
objects (LDAP servers used for certificate lookup are known as LDAPServer objects in the CLI).

A specific LDAP server that is defined in NetDefendOS for authentication can be shown with the
command:

gw-world:/> show LDAPDatabase <object_name>

The entire contents of the database can be displayed with the command:

8.2.4. External LDAP Servers

Chapter 8. User Authentication

307

«
...
305
306
307
308
309
...
»

Summary of Contents for DFL-210 - NetDefend - Security Appliance






















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DFL-210 - NetDefend - Security Appliance

Control Box 1000 Serie

Brand: Kerio Tech Pages: 24

ZyWall USG20-VPN

Brand: ZyXEL Communications Pages: 683

Brand: IBM Pages: 50

Brand: H3C Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands