manualshive.com logo in svg

D-Link DFL-1600 - Security Appliance, User Manual

Introducing the D-Link DFL-1600 - a powerful Security Appliance designed to safeguard your network. Unlock the full potential of this device by downloading the comprehensive User Manual for free from our website. Get detailed instructions, tips, and troubleshooting advice to maximize your network security.

Share
Download
background image

There are two types of certificates that can be uploaded: self-signed certificates and remote
certificates belonging to a remote peer or CA server. Self-signed certificates can be generated by
using one of a number of freely available utilities for doing this.

Example 3.18. Uploading a Certificate

The certificate may either be self-signed or belonging to a remote peer or CA server.

Web Interface

1.

Go to Objects > Authentication Objects > Add > Certificate

2.

Specify a suitable name for the certificate

3.

Now select one of the following:

•

Upload self-signed X.509 Certificate

•

Upload a remote certificate

4.

Click OK and follow the instructions

Example 3.19. Associating Certificates with IPsec Tunnels

To associate an imported certificate with an IPsec tunnel.

Web Interface

1.

Go to Interfaces > IPsec

2.

Display the properties of the IPsec tunnel

3.

Select the Authentication tab

4.

Select the X509 Certificate option

5.

Select the correct Gateway and Root certificates

6.

Click OK

3.7.3. CA Certificate Requests

To request certificates from a CA server or CA company, the best method is to send a CA
Certificate Request which is a file that contains a request for a certificate in a well known,
predefined format.

Manually Creating Windows CA Server Requests

The NetDefendOS Web Interface (WebUI) does not currently include the ability to generate
certificate requests that can be sent to a CA server for generation of the .cer and .key files required
by NetDefendOS.

It is possible, however, to manually create the required files for a Windows CA server using the
following stages.

•

Create a gateway certificate on the Windows CA server and export it as a file in the .pfx format.

•

Convert the .pfx file into the .pem format.

3.7.3. CA Certificate Requests

Chapter 3. Fundamentals

135

Summary of Contents for DFL-1600 - Security Appliance









































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DFL-1600 - Security Appliance

PaloAlto Networks PA-7050 PAN-AIRDUCT Replacement Manual preview
PA-7050 PAN-AIRDUCT
Brand: PaloAlto Networks Pages: 3
ZyXEL Communications ZyWALL USG 100 Series Brochure & Specs preview
ZyWALL USG 100 Series
Brand: ZyXEL Communications Pages: 6
PaloAlto Networks ION 7000 Hardware Reference Manual preview
ION 7000
Brand: PaloAlto Networks Pages: 30
Moxa Technologies NPort 6150 Series Quick Installation Manual preview
NPort 6150 Series
Brand: Moxa Technologies Pages: 2
Lanner NCA-4210 User Manual preview
NCA-4210
Brand: Lanner Pages: 88
Sophos SFM 200 Quick Start Manual preview
SFM 200
Brand: Sophos Pages: 14
Netgate XG-7100 Product Manual preview
XG-7100
Brand: Netgate Pages: 56
Netgate SG-3100 Manual preview
SG-3100
Brand: Netgate Pages: 65

Brands by name

Popular brands

Load more brands