3
Software Installation
Hardware installation as described in Chapter 2 must be completed
before you proceed with software installation.
Instructions for software installation are given as README files on
the D-Link DFE-660TX Software Diskette. The diskette also holds
the Installation Director program, which helps you access the
installation instructions appropriate to your station OS and the
network environment.
Run Installation Director
For proper function of Installation Director, it is necessary that the
DFE-660TX be plugged into a PC Card slot of the notebook PC.
Ascertain that the DFE-660TX is in place, according to Step 1 of
Hardware Installation, above, then insert the D-Link DFE-660TX
Software Diskette into the diskette drive of the notebook PC. Then
select that drive as the active drive. In the Run dialog box, or at the
command prompt, type the letter designator for that drive (here
assumed to be A), and complete the line as follows:
A:\install.exe
Then key
<Enter>
to run Installation Director. It will guide you
to, and display, the appropriate installation instructions. Installation
Director provides installation instructions for every combination of
platform OS and network environment in which the DFE-660TX can
be used.
