D-Link DFE-2600 Series, User Manual

Page: 91 / 110

Boot Configuration File 79
Uses address as the hub’s default gateway address. The address
should be in the form xxx.xxx.xxx.xxx, where each xxx is a number
between 0 and 255.
♦
auth-trap enable/disable
Enables or disables authentication failure traps for invalid SNMP com-
munity names. The argument for this field is either
enable
or
disable
.
♦
clear-SNMP-comm-table
Clears the hub’s SNMP community name table.
♦
SNMP-community
community permissions
Adds a community to the hub’s list of SNMP communities, with access
permissions. Four entries is the maximum allowed. The community
name can be up to 32 characters long. Permissions can be read for read-
only community access, or write for read-write community access.
♦
clear-ip-trap-manager-table
Deletes all entries from the hub’s trap manager list.
♦
ip-trap-manager address community
Adds the host at
address
to the hub’s SNMP trap manager list. Four
entries is the maximum allowed. Traps sent to the host will use the
community name variable
community
, which may be up to 32 char-
acters long.
♦
telnet-idle-time n