manualshive.com logo in svg

D-Link DES-5600, User Manual

Share
Download
D-Link DES-5600 User Manual Download Page 60

Fast Ethernet Switching System User’s Guide

Managing the DES-5600

53

SNMP Manager Configuration

Shown in Figure 27, this panel enables you to configure the DES-5600 for SNMP
Management. You must configure these settings to manage the DES-5600
through SNMP.

Figure 27: SNMP Manager Configuration

SNMP Community String

The SNMP Community String field enables you to name the SNMP Communities.
The names public and private are only default names. For security you should
change these names to help prevent unauthorized access to the DES-5600.

You can name the SNMP communities anything you like. You can enter up to 32
characters in each of the four fields. You can create up to four SNMP
Communities.

Access Right

Enables you to set the access rights that members of the SNMP Communities
have. Read Only access rights mean that members of the community can view the
information on the DES-5600 but they cannot make changes to the configurations.
Read/ Write access rights enable the members of the community to make any
changes they desire.

Status

Can be Enable or Delete. Only communities with Enable status can access the
DES-5600. Communities with Delete status cannot access the DES-5600.

Follow these steps to configure the DES-5600 for SNMP Management:

Summary of Contents for DES-5600






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands