manualshive.com logo in svg

D-Link DES-5600, User Manual

Share
Download
D-Link DES-5600 User Manual Download Page 31

Fast Ethernet Switching System User’s Guide

LEDs

24

16-Port 10/100-TX Module

This section covers the LEDs on the 16-Port 10/100 TX Module, see Figure 11.
The meaning of the LEDs is displayed in Table 3: 16-Port 10/100-TX Module
LEDs.

Duplex Mode

Link/ Act/ Speed

Figure 11: 16-Port 10/100-TX Module

Link/ Act/ 100/10

The Link/ Act/ 100/ 10 LED shows the link status, activity and speed of the port.
The LED is green when there is a link at the port. It flashes when there is activity.
100Mbps is indicated by color. Green indicates port speed of 100Mbps. Amber
indicates port speed of 10 Mbps.

Duplex

The Duplex LED indicates the duplex mode the port is in. The LED is green when
the port is in full duplex. It is dark when the port is in half duplex.

Full duplex means the port is transmitting and receiving data simultaneously. Half
duplex means that data is only being transmitted or received in one direction at a
time.

Table 3: 16-Port 10/100-TX Module LEDs

LED

Color

Dark

Link/
Act/ 100/
10

Green indicates port speed is 100 Mbps

Orange indicates port speed is 10 Mbps

LED flashes when there is activity.

No link or link is down

Duplex

Green indicates port is working at full
duplex

Port is working at half
duplex

Summary of Contents for DES-5600






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands