Fast Ethernet Switching System User’s Guide
Managing the DES-5200
38
Console Management
Console Management is always done through the RS-232 serial port and requires
a direct connection between the DES-5200 and a PC. This type of management is
very useful when the network is down and the DES-5200 cannot be reached by
any other means.
Use Console Management to log into the DES-5200 for the first time. You do not
need to know the IP address to log in using Console Management. You can
change all the settings and configure the DES-5200, set the IP address and
perform other management functions. The management session will timeout after
five minutes if you have not taken any action. Press Enter or C r to refresh
the screen. You will have to log in again after a timeout.
Follow these steps to begin a management session using Console Management:
1.
Attach the male end of the RS-232 serial cable provided with the
DES-5200 to the RS-232 port located at the front of the DES-5200.
2.
Attach the other end to the serial port of a PC or workstation.
3.
Run a terminal emulation program using the following settings:
•
Emulation:
VT-100/ANSI compatible
•
BPS:
19200
•
Parity:
None
•
Stop bits:
1
•
Flow Control:
Xon/Xoff
•
Terminal Keys:
Enabled
4.
Press Enter to display the login panel.
5.
Log in using the default User Name and Password. The User Name
and Password are case sensitive.
•
User Name:
D-Link
•
Default Password:
D-Link
6.
Press Enter to reach the Main menu.
Summary of Contents for DES-5200
Page 20: ...Fast Ethernet Switching System User s Guide Installing the DES 5200 13 Figure 6 Attach Feet ...
Page 56: ...Fast Ethernet Switching System User s Guide Managing the DES 5200 49 2 Press Enter ...
Page 119: ...Fast Ethernet Switching System User s Guide Web Management 112 Figure 64 Download Successful ...
