Fast Ethernet Switching System User’s Guide
Web Management
126
•
Cold Start
•
Authentication Failure
•
Link Change Event
Cold Start
Signifies that the DES-5200 has been powered up. Software settings are
reconfigured and hardware systems are rebooted. A cold start is different from a
factory reset.
Authentication Failure
Signifies that an addressee (or manager/ user) on the DES-5200 is not a valid user
of the DES-5200 and may have entered an incorrect community name.
Link Change Event
Signifies that the link of a port has changed from link up to link down or vice
versa.
IP Address
This field is used to enter the IP Addresses of Trap Managers.
SNMP Community String
Enter the Community String of the Trap Managers in this field.
Status
The DES-5200 will not send out traps unless the status is Valid.
Delete
Enables you to delete the current setting.
Follow these steps to enter the SNMP Community String:
1.
Enter the name of the SNMP Community.
2.
Select the Access Right field and use the down arrow to change the
setting.
3.
Select Apply. Select Refresh to see the changes.
Follow these steps to configure the SNMP Trap Manager Setting:
1.
Enter the IP Address of the Trap Manager.
2.
Enter the name of the SNMP Community String.
3.
Press Apply. Select Refresh to see the changes.
Summary of Contents for DES-5200
Page 20: ...Fast Ethernet Switching System User s Guide Installing the DES 5200 13 Figure 6 Attach Feet ...
Page 56: ...Fast Ethernet Switching System User s Guide Managing the DES 5200 49 2 Press Enter ...
Page 119: ...Fast Ethernet Switching System User s Guide Web Management 112 Figure 64 Download Successful ...
