manualshive.com logo in svg

D-Link DES-3828 - xStack Switch - Stackable, Cli Manual

The D-Link DES-3828 is a stackable xStack Switch designed to optimize network performance. Easily configure and manage this switch using the comprehensive CLI manual available to download for free from manualshive.com. Harness the power of this product with detailed instructions conveniently at your fingertips.

Share
Download
background image

xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual

 

 

275

40 

D-L

INK 

S

INGLE 

IP

 

M

ANAGEMENT 

C

OMMANDS

 

Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet instead of using 

stacking ports or modules. Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules: 

SIM is an optional feature on the Switch and can easily be enabled or disabled. SIM grouping has no effect on the normal 

operation of the Switch in the user’s network. 

There are three classifications for switches using SIM. The Commander Switch(CS), which is the master switch of the group, 

Member Switch(MS), which is a switch that is recognized by the CS a member of a SIM group,  and a Candidate 
Switch(CaS), which is a switch that has a physical link to the SIM group but has not been recognized by the CS as a 
member of the SIM group. 

A SIM group can only have one Commander Switch(CS). 

All switches in a particular SIM group must be in the same IP subnet (broadcast domain). Members of a SIM group cannot cross 

a router. 

A SIM group accepts up to 33 switches (numbered 0-32), including the Commander Switch (numbered 0). 

There is no limit to the number of SIM groups in the same IP subnet (broadcast domain), however a single switch can only 

belong to one group. 

If multiple VLANs are configured, the SIM group will only utilize the System VLAN on any switch. 

SIM allows intermediate devices that do not support SIM. This enables the user to manage a switch that are more than one hop 

away from the CS. 

The SIM group is a group of switches that are managed as a single entity. The DES-3800 Series may take on three different roles: 

Commander Switch (CS)

 – This is a switch that has been manually configured as the controlling device for a group, and takes on the 

following characteristics:  

It has an IP Address. 

It is not a Commander Switch or Member Switch of another Single IP group. 

It is connected to the Member Switches through its management VLAN. 

Member Switch (MS)

 – This is a switch that has joined a single IP group and is accessible from the CS, and it takes on the following 

characteristics: 

It is not a CS or MS of another IP group. 

It is connected to the CS through the CS management VLAN. 

Candidate Switch (CaS)

 – This is a switch that is ready to join a SIM group but is not yet a member of the SIM group. The 

Candidate Switch may join the SIM group through an automatic function of the xStack DES-3800 switch series, or by manually 
configuring it to be a MS of a SIM group. A switch configured as a CaS is not a member of a SIM group and will take on the 
following characteristics: 

It is not a CS or MS of another Single IP group. 

It is connected to the CS through the CS management VLAN. 

The following rules also apply to the above roles: 

1.

 

Each device begins in the Candidate state. 

2.

 

CS’s must change their role to CaS and then to MS, to become a MS of a SIM group. Thus the CS cannot directly be converted 
to a MS. 

3.

 

The user can manually configure a CS to become a CaS. 

4.

 

A MS can become a CaS by: 

a.

 

Being configured as a CaS through the CS. 

b.

 

If report packets from the CS to the MS time out. 

5.

 

The user can manually configure a CaS to become a CS 

6.

 

The CaS can be configured through the CS to become a MS.  

Summary of Contents for DES-3828 - xStack Switch - Stackable





































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3828 - xStack Switch - Stackable

YASKAWA SI-EP3/V Installation Manual preview
SI-EP3/V
Brand: YASKAWA Pages: 68
Net to Net Technologies UIM-1000T Installation Instructions preview
UIM-1000T
Brand: Net to Net Technologies Pages: 4
Watchguard XTM 850 Hardware Manual preview
XTM 850
Brand: Watchguard Pages: 30
Alcatel Speed Touch 591s Technical User'S Manual preview
Speed Touch 591s
Brand: Alcatel Pages: 184
ICP DAS USA iWSN-200E Quick Start Manual preview
iWSN-200E
Brand: ICP DAS USA Pages: 8
AIC SB401-MN User Manual preview
SB401-MN
Brand: AIC Pages: 88
Idis DR-6316PS-S Quick Manual preview
DR-6316PS-S
Brand: Idis Pages: 16
Buffalo AirStation G54 WLA2-G54 Quick Setup Manual preview
AirStation G54 WLA2-G54
Brand: Buffalo Pages: 8
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
Korenix JetNet 5720G-8P Series Quick Installation Manual preview
JetNet 5720G-8P Series
Brand: Korenix Pages: 52
Premio FlacheSAN2-D5 Quick Manual preview
FlacheSAN2-D5
Brand: Premio Pages: 2
Ubiquiti EdgeRouter X ER-X-SFP Quick Start Manual preview
EdgeRouter X ER-X-SFP
Brand: Ubiquiti Pages: 20
Williams Sound DW SY 1 User Manual preview
DW SY 1
Brand: Williams Sound Pages: 2
LevelOne FUS-3100 Quick Installation Manual preview
FUS-3100
Brand: LevelOne Pages: 61
NAUTICAST 300 2001 Product Manual preview
300 2001
Brand: NAUTICAST Pages: 20
Buffalo TERASTATION HS-D1.0TGL/R5 Technical Specifications preview
TERASTATION HS-D1.0TGL/R5
Brand: Buffalo Pages: 2
BinTec NetRACER Getting Started preview
NetRACER
Brand: BinTec Pages: 35
3Com Router 3000 Series Manual preview
Router 3000 Series
Brand: 3Com Pages: 37

Brands by name

Popular brands

Load more brands