xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual
131
18
802.1X
C
OMMANDS
(I
NCLUDING
G
UEST
VLAN
S
)
The DES-3800 implements the server-side of the IEEE 802.1x Port-based and MAC-based Network Access Control. This mechanism
is intended to allow only authorized users, or other network devices, access to network resources by establishing criteria for each port
on the Switch that a user or network device must meet before allowing that port to forward or receive frames.
Command Parameters
enable 802.1x
disable 802.1x
show 802.1x auth_state
{ports <portlist>}
show 802.1x auth_configuration
{ports <portlist>}
config 802.1x capability ports
[<portlist> | all] [authenticator | none]
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> |
tx_period <sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable | disable]}]
config 802.1x init
[port_based ports [<portlist> | all] | mac_based [ports] [<portlist> |all]
{mac_address <macaddr>}]
config 802.1x auth_mode
[port_based | mac_based]
config 802.1x reauth
{port_based ports [<portlist> | all] | mac_based [ports] [<portlist> |all]
{mac_address <macaddr>}]
config radius add
<server_index 1-3> <server_ip> key <passwd 32> [default | {auth_port
<udp_port_number 1-65535> | acct_port <udp_port_number 1-
65535>}]
config radius delete
<server_index 1-3>
config radius
<server_index 1-3> {ipaddress <server_ip> | key <passwd 32>
[auth_port <udp_port_number 1-65535> acct_port <udp_port_number
1-65535>]}
show radius
create 802.1x guest_vlan
<vlan_name 32>
config 802.1x guest_vlan ports
[<portlist> | all] state [enable | disable]
delete 802.1x guest_vlan
{<vlan_name 32>}
show 802.1x guest_vlan
Each command is listed, in detail, in the following sections.
