D-Link DES-3326S Layer 3 Switch
Configure Bandwidth Control
The bandwidth control settings are used to place a ceiling on the transmitting and receiving data bit rates for any port.
To change the maximum allowed bandwidth for a given port:
Click the selection button in the far left column that corresponds to the port you
want to configure and click the Edit button. A new dialog box used to edit
bandwidth settings opens.
Figure 10- 4. Edit Port Bandwidth
To limit either the Rx or Tx rates, deselect the No Limit check box and type the
desired rate. Rates can be expressed using whole numbers up to the maximum
available rate for the port.
Click on the
Apply
button to put the bandwidth limits into effect.
Figure 10- 5. Bandwidth Control Table
70
