D-Link DES-3326S Layer 3 Switch
Serial Port Settings
The
Serial Port Settings
window allows the configuration of the switch’s serial port.
Click on the
Serial Port Settings
link from the
Basic Setup
folder.
Figure 5- 4. Serial Port Settings
The following fields can then be set for the serial port:
Parameter
Description
Baud Rate
Set the serial bit rate used to communicate with a management station. The console
baud rate is 9600 bits per second.
Data Bits
Displays the number of bits that make up a word when communicating with the
management station. The console interface uses 8 data bits.
Stop Bits
Displays the number of bits used to indicate that a word has been completely transmitted.
The console interface uses 1 stop bit.
Auto-Logout
This sets the time the interface can be idle before the switch automatically logs-out the
user. The options are
2 mins, 5 mins, 10 mins, 15 mins,
or
Never
.
48
