10/100 Fast Ethernet Switch User’s Guide
64
Using the Console Interface
Figure 6-21. Protocol Parameters
STAP Port Parameters
The STAP Port Parameters allows you to change the behind the
scene parameters of the Spanning Tree Algorithm at the port
level. The parameters for this section have been fully explained in
Chapter 5,
Switch
Management
, see
STA Operation Levels: On the
port level
, and
User-changeable parameters
. It is recommended
that you read these sections and/or Chapter 5 first before
changing any of the parameters.
To change the STAP Port Parameters:
1.
Choose Spanning Tree Algorithm from the main menu.
2.
Choose
STAP Port Parameters
from the Spanning Tree
Algorithm menu.
3.
Enter the desired port in the
Port Number
(1-8) field.
4.
Enter the desired Port Path Cost in the
Port Path Cost (1-
65535)
field.
