35
D-Link DCS-933L User Manual
35
Section 3 - Configuration
FTP
Host Name:
Port:
User Name:
Password:
Path:
Passive Mode:
E
nter the IP address of the FTP server that you will be connecting to.
Enter the port of the FTP server that you will be connecting to. The default
is 21.
Enter the user name of your FTP server account.
Enter the password of your FTP server account.
Enter the destination path/folder to save files to on the FTP server.
Enabling passive mode may help you reach your FTP server if your camera
is behind a router protected by a firewall.
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Enable the
uploading of
images to an
FTP server:
Image
Frequency:
Base File Name:
Enabling this will allow snapshots to be uploaded in different ways:
•
Choosing
Always
will upload snapshots continuously based on
the
Image Frequency
specified.
•
Choosing
Schedule
will allow you to schedule when to start and
stop the uploading of snapshots.
•
Select
Motion/Sound Detection
if you would like the camera to
upload images only when motion or sound is detected.
Select the frequency you would like for your images to be taken and
uploaded. You can choose to upload by frames per second, or by seconds
per frame.
Choose a base file name for your snapshots.
