D-Link DCS-80-5/6 Outdoor Power Box
3
E
N
G
LIS
H
D-Link DCS-80-5/6 Outdoor Power Box
3
10 (J2)
8 (J1)
Pin
Definition
Pin
Definition
ALR_COM
ALARM
COM
ALR_COM
ALARM
COM
ALR_NC
ALARM
Normal
Close
ALR_NC
ALARM
Normal
Close
ALR_NO
ALARM
Normal
Open
ALR_NO
ALARM
Normal
Open
ALR_GND
ALARM
GND
ALR_GND
ALARM
GND
ALARM 8
ALARM
PIN 8
ALARM 8
ALARM
PIN 8
ALARM 7
ALARM
PIN 7
ALARM 7
ALARM
PIN 7
11 (J3)
9 (J4)
Pin
Definition
Pin
Definition
ALARM 6
ALARM
PIN 6
ALARM 6
ALARM
PIN 6
ALARM 5
ALARM
PIN 5
ALARM 5
ALARM
PIN 5
ALARM 4
ALARM
PIN 4
ALARM 4
ALARM
PIN 4
ALARM 3
ALARM
PIN 3
ALARM 3
ALARM
PIN 3
ALARM 2
ALARM
PIN 2
ALARM 2
ALARM
PIN 2
ALARM 1
ALARM
PIN 1
ALARM 1
ALARM
PIN 1
Table 3. Alarm Board Pin Definition
Table 4. Alarm Board Pin Definition
Figure 2. Alarm Board Diagram
Table 5. Internal Diagram
Prepare the power box for installation:
-
Remove the screws from the lid of the power
box.
-
Remove the lid, and set it aside.
-
Remove the padding from the enclosure.
-
Refer to the power box diagram in this
manual when attaching data and power
cables.
-
Refer to the alarm board diagram to attach
alarm wiring if needed.
-
Specify the appropriate adapter voltage.
Port
Cable Diameter
Purpose
C1, C3
6 mm - 12 mm
For Power Cord (AC
110 V/220 V
or AC 24 V)
C2, C4
10 mm - 14 mm
For Dome Camera or
External Data Cable
Connection Notice
- Connect any devices first before plugging in
the power supply.
- Verify that the power box model meets the
voltage requirements of your device.
Preparation Before Installation
C1 C2 C3 C4
