![background image](http://html.mh-extra.com/html/d-link/dcs-6815/dcs-6815_user-manual_77695037.webp)
37
D-Link DCS-6815/6817/6818 User Manual
Section 3 - Configuration
Motion Detection
This section allows you to enable and configure motion detection areas.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion Area:
Erase Motion Area:
Select this box to enable the motion detection feature of
your camera.
Specifies the measurable difference between two
sequential images that would indicate motion. Please
enter a value between 0 and 100.
Specifies the amount of motion in the window being
monitored that is required to initiate an alert. If this is set
to 100%, motion is detected within the whole window will
trigger a snapshot.
Draw the motion detection area by dragging your mouse
in the window (indicated by the red square).
To erase a motion detection area, simply click on the red
square that you wish to remove.
Right clicking on the camera image brings up the following
menu options:
Select All:
Draws a motion detection area over the entire
screen.
Clear All:
Clears any motion detection areas that have
been drawn.
Restore:
Restores the previously specified motion
detection areas.
Summary of Contents for DCS-6815
Page 1: ......