![background image](http://html.mh-extra.com/html/d-link/dcs-6815/dcs-6815_user-manual_77695027.webp)
27
D-Link DCS-6815/6817/6818 User Manual
Section 3 - Configuration
Network Setup
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP Port
Forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server running
on your network and would like your camera to obtain an IP
address automatically.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera.
A static IP address may simplify access to your camera in the
future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the
same subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the failure
of transmissions to a different subnet.
The primary domain name server translates names to IP
addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your camera to be configured as
a UPnP device on your network.
Enabling this setting allows the camera to add port forwarding
entries into the router automatically on a UPnP capable
network.
Use this section to configure the network connections for your camera. All relevant information must be entered accurately.
Summary of Contents for DCS-6815
Page 1: ......