D-Link DCS-6620G - Network Camera, Quick Installation Manual

Page: 2 / 24

1
Quick Installation Guide
DCS-6620G
Wireless PTZ Internet Camera
Package Contents
If any of the items are missing, please contact your reseller.
DCS-6620G
Wireless PTZ
Internet
Camera &
Remote
Control CD-ROM
with Manual
and
Software A/V Cable &
Category 5
Ethernet
Cable Power
Adapter 2 Antennas Camera
Stand
Hardware Installation
Connect the Ethernet Cable
Connect an Ethernet cable to the Ethernet connector located on
the Internet Camera’s back panel and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC power input connector
located on the Internet Camera’s back panel(labeled DC 12V) and
connect it to an AC power outlet.
Both the red and green LEDs will flash alternately and only the red
LED will remain lit. The green LED will not come on until you have
configured your camera.
If you already connect your device correctly, please refer to the Manual in the CD for software utility
installation step by step. You will install a software and use it to search and connect the camera.