D-Link DCS-6620G - Network Camera User Manual Download Page 15

Page: 15 / 145

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard Screen

Installation Wizard Screen

The following options are available on the Installation Wizard screen by clicking on the
corresponding tab:

Search:

Click to search for any available
cameras to connect to the network.

Add:

Click  to  manually  add  a  camera
to  the  network.  A  window  will
appear, prompting you to enter the
camera’s  IP  address  or  domain
name. A second window will appear,
prompting  you  to  enter  the  port
number.

Remove:

Click to remove the selected
camera(s) from the network.

Uncheck

All:

Click to uncheck all selected cameras.

Links to

Selected

Devices:

Click to view all selected devices on your Internet browser.

After you click “

Yes

” to the Verisign

certiﬁcate for authentication,
you should see an image from
your

DCS-6620G

802.11g PTZ

Internet Camera.

You have now completed the Setup Wizard and are ready to use your camera! You can also continue

to the section titled “Installing IP surveillance Software” (page 22) to install the IP surveillance

software before you begin to use the DCS-6620G.

Summary of Contents for DCS-6620G - Network Camera


















































































































































Search results

Summary of Contents for DCS-6620G - Network Camera

Reviews:

D-Link DCS-6620G - Network Camera, User Manual, Page: 15 / 145

Search results

Summary of Contents for DCS-6620G - Network Camera

Reviews: