49
D-Link DCS-6111 User Manual
Section 3 - Configuration
Color:
Power Line
Frequency:
Video
Orientation:
AGC:
Exposure Level:
Enable Auto Iris:
Enable WDR
(Wide Dynamic
Range):
Select either a
Color
or
B/W (black and white,
monochrome)
video display.
Select either 50 or 60Hz.
Flip
will vertically rotate the video.
Mirror
will
horizontally rotate the video. You may check both
options if the camera is being installed upside down.
Select to set the Automatic Gain Control value.
Automatic Gain Control increases the sensitivity of the
camera and is used to automatically adjust the gain
level of the video signal to a predetermined value. The
following options are available - 2X, 4X, or 8 X (field
time multiples). The default value is 4X. The higher
the value, the brighter the image will be, but this also
increases the noise ratio accordingly. This option is only
available when WDR is unchecked.
Select to set the exposure level from the drop down
box. The range included is from 1 to 8 and the default
value is 4. A higher value produces a brighter image.
This option is only available when WDR is unchecked.
Select to enable the auto iris function.
Select to enable the WDR function. WDR provides
better performance especially when the image
contains both very dark and bright areas. Also helps
the camera to cope with varying lighting conditions.
Image Setup
You may configure the image settings of the video for your network camera. A preview of the image will be shown in the
window of Live Video. Click
Save Settings
to save and activate your changes.
Summary of Contents for DCS-6111
Page 1: ......
Page 76: ...76 D Link DCS 6111 User Manual Section 3 Configuration Help ...
