43
D-Link DCS-6111 User Manual
Section 3 - Configuration
Optional default
router :
Optional primary DNS :
PPPoE Settings:
HTTP:
Authentication:
HTTP Port:
Secondary HTTP Port:
Access name for
stream1:
Enter the IPv6 router address.
Enter the IPv6 DNS address.
Enable this setting if your ISP (DSL service) is using PPPoE. You may already have both Username and Password given by your ISP,
or you may check with your ISP. The Connect Status will be determined automatically by the system.
You may configure two HTTP ports for your camera. HTTP ports allow you to connect to the camera via a standard web browser.
These ports can be set to a number other than the default TCP ports 80 and 8080. A corresponding port must be opened on the
router. For example, if the port is changed to 1010, users must type in the web browser “http://192.168.0.100:1010” instead of
“http://192.168.0.100”.
Choose either
Basic
where the password is not encrypted, or
Digest
where the password is encrypted during the transmission
to the web server.
Note:
Restart your browser, if you select
Digest
mode.
Basic authentication:
The password is sent in plain text format; there can be potential risks of being intercepted.
Digest authentication:
User credentials are encrypted in MD5 algorithm and thus provide better protection against unauthorized
accesses.
The default value is 80.
The default value is 8080.
After you have enabled the Authentication, you will need to configure and use the access name to access your video file. For
example, http://camera ip/video.mjpg (video.mjpg is the Access name, you can modify it here)
The default name is video.mjpg.
Summary of Contents for DCS-6111
Page 1: ......
Page 76: ...76 D Link DCS 6111 User Manual Section 3 Configuration Help ...
