14
D-Link DCS-6100LH User Manual
Section 3 - mydlink
1
Device Name
Tap to change the device’s name.
2
Privacy Mode
Tap to enable. Privacy mode will disable the camera feed.
3
Motion Settings
Tap to set the Motion area and sensitivity settings.
4
Storage
Tap to change the video clips storage location from the microSD card to the
cloud. You can also subscribe to mydlink Cloud from here and view your
current subscription plan.
5
Camera Microphone
Tap to enable or disable picking up sound near your camera in live view
and recordings.
6
Night Vision
Tap to change night vision detection to
On
,
Off
or
Auto
.
7
Anti-Flicker
Reduces flicker in the video. Tap
50 Hz
or
60 Hz
depending on the frequency
of your lights.
8
Invert Image
Enable this to invert the camera view.
9
Status LED
Disabling this will turn off the LED until you turn it back on.
10
Designated Contact
Tap here to add, remove, or edit designated contacts that appear in the
rich notification.
11
Wi-Fi
Tap to see the current wireless network.
Note:
Tap
Remove Device
or press the reset button if you want to change wireless networks.
12
Time Zone
Select the time zone to calibrate your device to.
13
Firmware
This displays the installed version of the firmware on your device. Tap to enter
the update settings. You can choose the most suitable time for automatic
updates.
14
MAC ID
Identifies the device for support issues.
15
Remove Device
Tap this button to disconnect this device from your mydlink account.
2
3
4
5
6
7
8
9
10
11
13
14
12
15
1
