58
D-Link DCS-4802E User Manual
Section 3: Configuration
Here you can define which IP addresses are allowed to view your DCS-4802E. You can set up to 7 IP address ranges for both the allow
and deny lists.
Access List
Allow List:
Start IP Address:
End IP Address:
Delete Allow
List:
Deny List:
Start IP Address:
End IP Address:
Delete Deny List:
The section lets you define what IP addresses have access rights to
the camera.
Note
: When adding entries to the Allow list, make sure the first entry
includes the IP address of the computer or device you are using to
access the camera. Otherwise, you may be blocked from accessing
the camera after adding the entry to the Allow list.
The starting IP address of the IP address range for the devices (such
as a computer) that have permission to access the video of the
camera.
The ending IP address of the IP address range for the devices (such as a computer) that have permission to access the
video of the camera. Click
Add
to save your changes.
Select an entry to remove from the Allow List, then click
Delete
.
The list of IP addresses that have no access rights to the camera.
The starting IP address of the IP address range for the devices (such as a computer) that will be denied access to the
camera.
The ending IP address of the IP address range for the devices (such as a computer) that will be denied access to the
camera. Click
Add
to save your changes.
Select an entry to remove from the Deny List, then click
Delete
.
Note
: All addresses in the Deny List will be denied access, even if they are also in the Allow List.
