D-Link DCS-4633EV, Quick Installation Manual

Page: 8 / 132

D-Link DCS-4633EV Quick Installation Guide
6
E
N
G
LI
S
H
Mounting Instructions
It is highly recommended that you configure and test your camera before mounting it.
Place the mounting sticker where you want to position the
camera.
Use a 6 mm drill bit to make the required holes
approximately 25 mm deep, then insert the wall anchors
into the holes.
If you are running the camera cables through the wall ,
drill a hole in the center and pull the cables through the
hole.
Use the included wrench to loosen the 4 screws on the
top of the camera, then lift the camera cover off.
Use the screws provided to mount the camera to the wall.
If you are running the camera cables out the side of
the camera , guide the camera cables through the cable
channel on the base.