35
D-Link DCS-4625 User Manual
Section 3: Configuration
Automatic:
Day Mode:
Night Mode:
Schedule
Mode:
The Day/Night mode is set automatically. Generally, the camera uses Day
mode and switches to Night mode when needed. Use the
Day to Night value
drop-down box to select when the camera should switch to Night mode
and the Night to Day value to select when the camera should switch to Day
mode. The
Current value
box shows what the current lighting conditions
are like, and you can refresh this information by clicking the
Refresh
button.
Day mode enables the IR Cut Filter and turns off the IR LEDs.
Night mode disables the IR Cut Filter and turns on the IR LEDs.
Set Day/Night mode using the schedule set in the drop-down boxes. The
camera will enter Day mode at the starting time and return to Night mode
at the ending time. Activate the
Disable IR LED
to set Day mode for the set
times.
IR & ICR
Use this section to configure the IR LED and IR-cut removable filter behavior
for your camera.