28
D-Link DCS-3716 User Manual
Configuration
Image Setup
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable.Privacy.
Mask:
Mirror:
Flip:
White.Balance:
Exposure.Mode:
Denoise:
Brightness:
Contrast:
Saturation:
Sharpness:.
WDR.Level:
Reset.Default:
The Privacy Mask setting allows you to specify up to 3 rectangular areas on
the camera's image to be blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the camera image to draw a
mask area. Right-click on the camera image to bring up the following menu
options:
Disable.All:
Disables all mask areas
Enable.All:
Enables all mask areas
Reset.All:
Clears all mask areas.
Mirrors the images.
Rotates the image 180 degrees.
If this option is enabled, white objects will be rendered as white on the screen.
Changes the exposure mode. Use the drop-down box to set the camera for
Indoor, Outdoor, or Night environments, or to capture Moving objects. The
Low Noise option will focus on creating a high-quality picture without noise.
You can also create 3 different custom exposure modes. The Max Gain setting
will allow you to control the maximum amount of gain to apply to brighten the
picture.
This setting controls the amount of noise reduction that will be applied to the picture.
Adjust this setting to compensate for backlit subjects.
Adjust this setting to alter the color intensity/strength.
This setting controls the amount of coloration, from grayscale to fully saturated.
Specify a value from 0 to 8 for image edge enhancement.
Adjust the wide dynamic range level from 0 to 8; higher settings are better for high-contrast environments.
Click this button to reset the image to factory default settings.
