![background image](http://html.mh-extra.com/html/d-link/dcs-3714/dcs-3714_user-manual_77616035.webp)
35
D-Link DCS-3714 User Manual
Configuration
Motion Detection
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used
for monitoring.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion
Area:
Erase Motion
Area:
Select this box to enable the motion detection feature of your
camera.
Specifies the measurable difference between two sequential
images that would indicate motion. Please enter a value between
0 and 100.
Specifies the amount of motion in the window being monitored
that is required to initiate an alert. If this is set to 100%, motion is
detected within the whole window will trigger a snapshot.
Draw the motion detection area by dragging your mouse in the
window (indicated by the red square).
To erase a motion detection area, simply click on the red square
that you wish to remove.
Right clicking on the camera image brings up the following menu
options:
Select All:
Draws a motion detection area over the entire screen.
Clear All:
Clears any motion detection areas that have been drawn.
Restore:
Restores the previously specified motion detection areas.