![background image](http://html.mh-extra.com/html/d-link/dcs-3511/dcs-3511_user-manual_77610048.webp)
48
D-Link DCS-3511/DCS-3530 User Manual
Configuration
• Add to deny list:
You can select entries from the Connection Status list and add them to the Deny List to deny access. Please note that the
selected connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player). If you
want to enable the denied list, please select
Enable access list filtering
and click
Save
in the first column.
Disconnect:
If you want to break off the current connections, please select them and click this button. Please note that those selected
connections will only be disconnected temporarily and will automatically try to re-link again (IE Explore or Quick Time Player).
Enable Access List Filtering:
Select this item and click
Save
if you want to enable the access list filtering function.
Filter Type
Select Allow or Deny as the filter type. If you choose Allow Type, only those clients whose IP addresses are on the Access List below can access
the camera, and the others cannot access. On the contrary, if you choose Deny Type, those clients whose IP addresses are on the Access List
below will not be allowed to access the camera, and the others can access.
Filter
Then you can add a rule to the following Access List. Please note that the IPv6 access list column will not be displayed unless you enable IPv6 on
the Network page. For more information about IPv6 Setting, please refer to Enable IPv6 for detailed information.
There are three types of rules:
Single:
This rule allows the user to add an IP address to the Allowed/Denied list.
Network:
This rule allows the user to assign a network address and corresponding subnet mask to the Allow/Deny List.
Range:
This rule allows the user to assign a range of IP addresses to the Allow/Deny List (This rule is only applied to IPv4).
Administrator IP address
Always allow the IP address to access this device: You can select this item and add the Administrator’s IP address in this field to make sure the
Administrator can always connect to the device.