25
D-Link DCS-3511/DCS-3530 User Manual
Configuration
Mechanical PTZ
Control Panel
Digital PTZ
Control Panel
PTZ Control
This camera supports both “digital“ (e-PTZ) and “mechanical“ pan/tilt/
zoom control. Please refer to PTZ Control for detailed information.
Mechanical PTZ:
Connect the camera to a PTZ driver or
scanner via RS-485 interface.
Digital PTZ:
Control the e-PTZ operation. It allows users to
quickly move the focus to a target area for close-up viewing
without physically moving the camera.
ePT Direction
Home:
Move the camera to the preset home position.
Direction:
Control the camera’s pan or tilt directions (up/down/left/
right).
Focus
Control camera focus to get a clear image. (Available only under
mechanical PTZ mode*)
Focus Near
Focus Far
Zoom
Zoom in/out to magnify or shrink the digital image.
Zoom in:
Magnify image
Zoom out:
Diminish image
Patrol Auto Pan
Patrol:
Patrol executes a pre-defined sequence of pan, tilt,
zoom, and focus features Before selecting this, users must
define at least two preset points.
Auto Pan:
Auto Pan automatically scans an area horizontally.
Stop:
Stop patrol or auto pan.
Go Preset
Select from the preset drop-down list to quickly move the camera to
the desired preset position.
Speed Control
Control Pan/Tilt/Zoom speed
Pan Speed Control
Tilt Speed Control
Zoom Speed Control