42
D-Link DCS-3411/3430 User Manual
Section 3 - Configuration
Select this option to enable the recording feature.
Selecting this will allow you to record to a SD Card inserted into
the SD slot on the right side of the unit. When recording to the SD
card, you can only use Event Based recording.
To access your account on the Samba network drive, enter your account
or anonymous username and password.
The name of your Samba server.
The name of the shared folder used for recording.
Click this thumbnail to verify the connection status of your camera to
the Samba network drive.
Displays the connection status that is determined by the system. You can
click
Get Status
to refresh the status.
Select your pre-defined profile from the drop-down menu.
When the recording storage area is full, you may choose to stop recording,
or recycle the recording files so that your camera can record the video
continuously.
Records when Motion Recording, Digital Input 1, or Digital Input 2 is
triggered.
A preset amount of time before motion recording is triggered.
A preset amount of time after motion recording is triggered.
Select to continuously record.
Select this option to manually schedule and configure the starting and
ending time for the recording.
Recording
In this section, you can configure and schedule the recording setting for your IP camera.
Enable Recording:
SD Card:
Samba Auth:
Server:
Shared Folder:
Test:
Samba Status:
Resolution:
When Storage is full:
Event Based:
Prerecord:
Postrecord:
Continous:
Scheduled:
