30
Note: Because a dynamic WAN IP can change from time to time depending on
your ISP, you may want to obtain a Static IP address from your ISP. A Static IP
address is a fixed IP address that will not change over time and will be more
convenient for you to use to access your camera from a remote location. The
Static IP Address will also allow you to access your camera attached to your
router over the Internet
Open Virtual Server Ports to Enable Remote Image Viewing
Using & Configuring the DCS-3220 with a
NAT Router (continued)
The firewall security features built into the DI-624 router prevent users from
accessing the video from the
DCS-3220
over the Internet. The router connects
to the Internet over a series of numbered ports. The ports normally used by the
DCS-3220
are blocked from access over the Internet. Therefore, these ports
need to be made accessible over the Internet. This is accomplished using the
Virtual Server
function on the DI-624 router. The Virtual Server ports used by
the camera must be opened through the router for remote access to your
camera. Virtual Server is accessed by clicking on the
Advanced
tab of the
router screen.
Determine Your Router’s IP Address (WAN)
Your WAN IP
Address will be
listed here.
Summary of Contents for DCS-3220 - SECURICAM Network Camera
Page 137: ...137 Time Zone Table continued ...
