D-Link DCS-3010 User Manual Download Page 68

Page: 68 / 72

D-Link DCS-3010 User Manual

Configuration

Upload custom language file: Click

Browse…

and specify your own custom language file to upload.

Export setting backup file:

Click to export all parameters for the device and user-defined scripts.

Upload setting backup file: Click

Browse…

to upload a setting backup file. Please note that the model and firmware version of the

device should be the same as the setting backup file. If you have set up a fixed IP or other special settings for your device, it is not

suggested to upload a settings backup file.

Firmware upgrade:

This feature allows you to upgrade the firmware of your camera. It takes a few minutes to complete the process.

Note:

Do not power off the camera during the upgrade!

Follow the steps below to upgrade the firmware:

1. Download the latest firmware file from the D-Link website. The file is in .pkg file format.

2. Click

Browse…

and specify the firmware file.

3. Click

Upgrade

. The camera starts to upgrade and will reboot automatically when the upgrade completes.

If the upgrade is successful, you will see “Reboot system now!! This connection will close”. After that, re-access the camera.

Summary of Contents for DCS-3010









































































Search results

Summary of Contents for DCS-3010

Reviews:

Related manuals for DCS-3010

Brands by name

Popular brands

D-Link DCS-3010, User Manual

Search results

Summary of Contents for DCS-3010

Reviews:

Related manuals for DCS-3010

Brands by name

Popular brands